For reasons that cannot be exposed without jeopardizing national security, the engines must be delivered within 60 days. Knight Engines Inc. , has been involved in the manufacture of a wide variety of engines for nearly five years. Although Knight has managed to turn a healthy profit every year, sales for it’s V-Z engines has been lagging somewhat. It is for this reason that Knight is quite excited by the government’s request for V-Z engines. Knight has dealt with the government before and their established reputation would certainly be a bonus in their favor if per chance another company were to submit an equally low bid.Order now
There is, however, one problem: Although Knight does have the capacity to build one thousand V-Z automobile engines, they do not have the pistons required to make the Class “A” engines. Their regular piston supplier only manufactures inferior “Class C” pistons, which would be unacceptable to the government. Since one thousand engines are to be produced, eight thousand Class “A” pistons are required. If the Class “A” pistons could be acquired within two weeks, the two-month government deadline could be met.
Knight made inquiries at several companies and only one showed any interest in supplying Knight with all the class “A” pistons that it needs on such short twice. The Caliber Engine Parts Company stated that it would be possible to process such a rush order but that it would do so only on two conditions: First, that the chassis of any engine constructed with their pistons clearly states that it is fitted with Caliber brand pistons. Second, that a 5% a mark-up be applied due to the extra costs of processing such an order on short notice.
Although the technical aspect of fitting these pistons into the engines presents no problems, the people in manufacturing are rather concerned about using a new type of piston trot a company with which Knight has no previous experience. They stated that on the average, about 3 to of the “Class C” pistons ordered in the past (trot other suppliers) contained various structural flaws that rendered them unusable, There is no reason to believe that the “Class A” pistons should fare any differently. It is therefore essential that Caliber provide some sort of guarantee in order to ensure that Knight does not have to pay for defective pistons.
Even with such a guarantee, the inevitable delays for the delivery of a replacement could hinder Knight’s ability to complete its engines before the government deadline. In order to cushion against such a problem, it eight be advisable to order extra pistons. Ideally, Caliber would agree to take back all unused pistons as part of a guarantee package. You are Knight’s Director of Purchasing and it is your responsibility to negotiate a contract With Caliber for their Class “A” pistons, the Series 2. Intensifies pistons. Since the price paid for the piston will raise the overall cost of the engine and therefore affect the bid submitted to the government, it is paramount that the lowest possible price be paid. In order to strike a good deal, you must pay careful attention to the following points: 1. You have never before purchased Class “A” pistons. Your knowledge of the market for other pistons (for instance, the Class “C” pistons sell for $250 each) suggests that they should sell for about $500 per piston.
The absolute maximum that could be paid per piston and still enable the submission of a competitive bid would be $600 per piston. 2. There is rumor that Caliber has been trying to get its foot in the door with respect to government contracts. Many of your colleagues find it somewhat unreasonable that Caliber should have a tree ride on Knight’s coattails by having their company name mentioned on all the Knight engines fitted with Caliber pistons, especially when you consider that they are charging a 5% “rush” fee.
Perhaps Caliber should deduct from their price in return for this advertising service. Still, you do not want to press this issue too far because your company president has told you that it might be in the interests Of Knight to develop a good relationship with Escalator’s management since Knight may one day be in a position to acquire this smaller company. 3. A competitor of Escalator’s, Moored Technologies Inc. , has stated emphatically that it would in no way be able to fulfill such a rush order for a animal piston in 2 weeks time.
However, they did state that if Knight was willing to wait 4 weeks for shipment, they would gladly supply all the pistons required for $470 per piston. Although a 4 week delivery date would certainly not allow enough time to meet the government deadline, Knight could use these pistons to upgrade some engines in stock and await another government or private contract. Your success during the negotiation process will be determined by two factors: 1) the average price per piston agreed upon: and, 2) the type of quality-control guarantee obtained.