Version 1. 0Readme File10/30/98************************************************************************About This Document: This document contains last-minute information about Half-Life, including questions you may have concerning the game or your computer. If you have a question, check to see if it is addressed here first: you may save yourself a call to Technical Support. ************************************************************************I. MINIMUM REQUIREMENTSII.
GENERAL TECHNICAL ISSUESIII. GENERAL GAME ISSUESIV. 3D HARDWARE ISSUESV. CONTACTING SIERRAI.
MINIMUM REQUIREMENTSWindows(r) 95, Windows 98 or Windows NT 4. 0Pentium 133+, 24 MB RAMSVGA, high color (16-bit)2x CD-ROM driveWindows-compatible sound cardMouse, keyboardII. GENERAL TECHNICAL ISSUESDRIVER ISSUESWhen running Half-Life in OpenGL, you must select ‘3Dfx Mini Driver’ from the drivers list in the Video Options menu if you have a 3Dfx card (Voodoo, Voodoo2, Rush or Banshee). Choosing the ‘Default’ driver may severely impact Half-Life’s performance. Make sure the most current version of DirectX is installed on your computer. DirectX 6 is the most current version (as of 10/31/98), and it is included on the Half-Life CD in the ‘DirectX’ folder.
If you are running a pre-OSR2 release of Windows95, get the OpenGL 1. 1 fix in order to run Half-Life in OpenGL mode. The fix can be found at ftp://ftp. microsoft. com/softlib/mslfiles/opengl95. exeMake sure you have installed the most recent drivers for all your hardware before playing Half-Life.
III. GENERAL GAME ISSUESSOUND PROBLEMSIf you don’t hear any sounds while playing Half-Life or if you only hear music, another application you are running may have control of the sound hardware. Exit Half-Life, close the other application, and restart Half-Life. HOTKEY PROBLEMSHotkeys can be activated by using the ALT key in combination with the highlighted letter.
For example, you can use ALT+R to perform a ‘Refresh’ within the Multiplayer/Internet Games menu. CD MUSIC VOLUMEYou cannot control the CD music volume within Half-Life. To adjust your CD music volume, go to the Windows Start Menu, Programs, Accessories, Multimedia, and select the Volume Control applet. CD AUDIO SLOWDOWNSSome CD-ROM drives take a few seconds to spin up to their playing speed. You may notice some parts of the game that will momentarily slow down before the CD audio will play.
VIEW OPENING AVI SEQUENCESHalf-Life begins with two short AVI sequences. If you are having trouble viewing the AVIs, check to see that you have video compression installed. Go to the Control Panel and select Add/Remove programs. From there, select Windows Setup and scroll down to Multimedia. Select Multimedia and make sure that Video Compression is checked. CUSTOM KEYBOARD CONFIGURATIONIf you plan to customize your keyboard configuration, note that the ‘jump’ and ‘crouch’ commands need to be controlled by different fingers.
You will need to use both keys simultaneously when performing a ‘longjump. ‘DESKTOP RESOLUTION AND HALF-LIFEHalflife should be run in a resoulution that is lower than or equal to your destop resolution. Running Half-Life in a fullscreen or windowed mode that is greater than your desktop resoulution can cause problems. JOYSTICK AND GAMEPAD CONFIGURATIONEnable use of joysticks or gamepads by checking the joystick box in the Configuration/Controls/Advanced controls menu.
Joystick and gamepad buttons can then be configured through the Configuration/Controls menu. Valve thanks James Barnes at First-Person Gaming, Inc. for permission to use his excellent documentation on joystick support. Information on their products are available on the Internet at http://www. fpgaming. com/.
Half-Life supports standard joysticks, digital joysticks and advanced controllers like the FPgaming Assassin 3D, the Logitech WingMan Warrior and the SpaceTec IMC SpaceOrb. To enable Half-Life joystick support, verify that your joystick or game controller is selected in the Joystick control panel applet and has been calibrated and tested, then launch Half-Life. Check the joystick box in the Configuration/Controls/Advanced controls menu of Half-Life. For advanced controllers, you will also need to have a configuration file called joystick. cfg. Typically this configuration file should be obtained from your game controller company.
However you can create your own and place this file in the Valve subdirectory of your Half-Life directory. Half-Life will automatically execute this configuration file each time you start the game. The configuration files for common game controllers are included below. Half-Life Joystick functionality1. Proportional movement (the farther you move the stick, the faster you move) 2.
Support for up to 32 buttons (JOY1-JOY4 and AUX5-AUX32)3. Sensitivity setting for each control (allows tuning and inverting the control direction)4. Dead-zone setting for each control5. Support for all 6 axes (X, Y, Z, R, U, V)6. Mapping of any axis to any control (Forward, Look, Side, Turn)7. Support for absolute controls (like joysticks) and relative controls (like trackballs and spinners)The default joystick setting is for joystick left/right movement to control turning and for joystick forward/backward movement to control moving forward/backward.
To control strafing, assign the ‘strafe modifier’ to one of your joystick buttons (via the Configuration/Controls menu). To control joystick looking, assign the ‘mouse look modifier’ to one of your joystick buttons (also via the Configuration/Controls menu). ‘Reverse mouse’ in the Configuration/Controls/Advanced controls menu also changes the direction the joystick has to move when looking up and down. The following variables can be set in your joystick.
cfg. These variables control your sensitivity settings:Command NameCommand ActionDefaultNOTES:Variable: JoyforwardsensitivityFunction: Controls the ramp-up speed or how much joystick movement is required for moving “full speed” forward and backwardDefault: -1. 0Comments: If your joystick is not as fast as you think it should be try a setting of -1. 5, you will reach full speed with only half of the movement. Variable: JoysidesensitivityFunction: Controls the ramp-up speed or how much joystick movement is required for moving “full speed” side to sideDefault: 1.
0Comments: If your joystick is not as fast as you think it should be try a setting of 1. 5, you will reach full speed with only half of the movement. Variable: JoypitchsensitivityFunction: Controls the speed or ratio used when you look up and down using the Assassin 3DDefault: -0. 25Comments: This setting will allow you to look Up and Down at a 45 degree angle without repositioning your hand. Variable: JoyyawsensitivityFunction: Controls the speed that or ratio used when you look left to right using the Assassin 3DDefault: -0. 5Comments: This setting will allow you to look left and right at a 90 degree angle without repositioning your hand.
You can set the sensitivity settings to negative numbers. This inverts the direction of movement for the control. The default sensitivity settings are 1 (or -1). These variables control your threshold settings:Command NameCommand ActionDefaultNOTES:Variable: JoyforwardthresholdFunction: Controls the dead-zone for moving forward and backwardDefault: 0. 15Comments: If you have problems with your character moving forward or back when trying to stop or strafe, increase this number to . 20Variable: JoysidethresholdFunction: Controls the dead-zone for moving side to sideDefault: 0.
15Comments: If you have problems with your character moving left or right when trying to stop or walk a ledge, increase this number to . 20Variable: JoypitchthresholdFunction: Controls the dead-zone for looking up and downDefault: 0. 15Variable: JoyyawthresholdFunction: Controls the dead-zone for looking left and rightDefault: 0. 15The threshold settings allow you to control your dead-zone (or no-movement zone). The default threshold settings are . 15 (meaning 15% of the full-range).
The range of the threshold settings is from 0 to 1. Troublesome analog joysticks may need a larger number (like . 2). Premium joysticks can use a smaller number (like .
1). If your joystick has a POV hat, the buttons are mapped to AUX29-AUX32. So, you get 8 buttons with the Logitech WingMan Extreme, 12 buttons with the Microsoft SideWinder 3D Pro, etc. These six variables control axis mapping:Command NameCommand ActionDefaultNOTES:Variable: JoyadvaxisxFunction: Controls mapping of DirectInput axis X (typically joystick left and right)Default: 3Comments: Allows the joystick to turn. Variable: JoyadvaxisyFunction: Controls mapping of DirectInput axis Y (typically joystick forward and backward)Default: 1Comments: Allows the joystick to move forward and backward. Variable: JoyadvaxiszFunction: Controls mapping of DirectInput axis Z (typically joystick throttle)Default: 0Comments: Not used.
Variable: JoyadvaxisrFunction: Controls mapping of DirectInput axis R (typically joystick rudder)Default: 0Comments: Not used. Variable: JoyadvaxisuFunction: Controls mapping of DirectInput axis U (custom axis – Assassin 3D trackball left and right, WingMan Warrior SpinControl and SpaceOrb roll)Default: 20Comments: Sets the Assassin 3D to relative turning left and right. (Not self centering)Variable: JoyadvaxisvFunction: Controls mapping of DirectInput axis V (custom axis Assassin 3D trackball forward and backward and SpaceOrb yaw)Default: 18Comments: Sets the Assassin 3D to relative free-look up and down. (Not self centering)Each joyadvaxis variable can be set to the following controls:0 = Axis not used1 = Axis is for forward and backward movement2 = Axis is for looking up and down (pitch)3 = Axis is for side to side movement4 = Axis is for turning left and right (yaw)Additionally, each axis can be designated as an absolute axis (like a joystick) or a relative axis (like the FPgaming trackball or the WingMan Warrior SpinControl).
Absolute axes are defined as having a stopping position whereas relative axes don’t have a stopping position and just go around and around. To designate an axis as a relative axis, add 16 to the above control number. For example, to set the Assassin 3D’s axis U to be looking left and right, type ‘joyadvaxisu 20’. As another example, to make your rudder pedals control turning left and right, type ‘joyadvaxisr 4’. It’s a bit complicated, but only needs to be done once.
The advanced axes variables will not have any effect until joyadvanced is set to 1. 0. Additionally, any changes to the axes will not take effect until the joyadvancedupdate command is executed. So, the procedure for creating an advanced mapping is:1. Set ‘joyadvanced 1’2.
Make any desired mapping changes3. Make any desired sensitivity changes4. Make any desired threshold changes5. Call ‘joyadvancedupdate’Here is the configuration file for the FPgaming Assassin 3D:// Revision 1. 0 — refer to www. fpgaming.
com for updatesjoyname “FPgaming Assassin 3D”joyadvanced 1joyadvaxisx 3joyadvaxisy 1joyadvaxisz 0joyadvaxisr 0joyadvaxisu 20joyadvaxisv 18joyforwardsensitivity -1. 0joysidesensitivity 1. 0joypitchsensitivity -0. 25joyyawsensitivity -0. 5joyforwardthreshold 0. 15joysidethreshold 0.
15joyyawthreshold 0. 0joypitchthreshold 0. 0+mlookjoyadvancedupdateHere is a configuration file for the Logitech WingMan Warrior:// Revision 0. 1 — refer to www. logitech. com for updatesjoyname “Logitech WingMan Warrior”joyadvanced 1.
0joywwhack1 1. 0joywwhack2 1. 0joyadvaxisx 3joyadvaxisy 1joyadvaxisz 0joyadvaxisr 0joyadvaxisu 20joyadvaxisv 0joyforwardsensitivity -1. 0joysidesensitivity 1. 0joypitchsensitivity 0.
0joyyawsensitivity -0. 6joyforwardthreshold 0. 15joysidethreshold 0. 15joypitchthreshold 0. 0joyyawthreshold 0.
0joyadvancedupdateHere is a config file for the SpaceTec IMC SpaceOrb:// Revision 0. 1 — refer to www. spacetec. com for updatesjoyname “SpaceTec IMC SpaceOrb”joyadvanced 1.
0joyadvaxisx 3joyadvaxisy 1joyadvaxisz 0joyadvaxisr 2joyadvaxisu 0joyadvaxisv 4joyforwardsensitivity -1. 0joysidesensitivity 1. 0joypitchsensitivity -0. 5joyyawsensitivity 1joyforwardthreshold 0. 1joysidethreshold 0.
1joypitchthreshold 0. 1joyyawthreshold 0. 1+mlookjoyadvancedupdateHere is a config file for making your joystick operate looking around and strafing, your rudder pedals control turning left and right and throttle control moving forward and backward:joyname “Joystick, Rudder & Throttle”joyadvanced 1. 0joyadvaxisx 3joyadvaxisy 2joyadvaxisz 1joyadvaxisr 4joyadvaxisu 0joyadvaxisv 0joyforwardsensitivity -1.
0joysidesensitivity -1. 0joypitchsensitivity 1. 0joyyawsensitivity -1. 0joyforwardthreshold 0. 15joysidethreshold 0.
15joyyawthreshold 0. 15joypitchthreshold 0. 15joyadvancedupdateTwo additional values you can set specifically for the Wingman Warrior:There are two variables which enable special response curves tuned for the Logitech Wingman Warrior joystick. “joywwhack1” fixes a centering problem.
“joywwhack2” fixes an “out of control” spin problem when using the joystick to turn or look left/right. See the Wingman Warrior configuration above for an example of how to use these in your joystick. cfg. CONSOLE COMMANDS AND CONTROLSFor a complete listing of Half-Life’s console commands, visit http://www. planetquake.
com/worldcraftCREATE A CUSTOM DECALMaking a custom decal is a simple process. All you need is an image, and a paint program capable of simple palette manipulation and image scaling. Paint Shop Pro is ideal, and is available as shareware from http://www. jasc.
com. The steps for creating a decal are: 1. Paint or scan an image. Make it 64 by 64 pixels in size, either by painting the image to that size, or by scaling your scanned image (or larger painted image. ) ).
Painting in black and white is recommended, because the final decal will be displayed as one color only. You can choose the color of your decal and you can change that color at any timebetween games using the game interface. Save your source decal as a black and white image, however. 2.
Use your paint program to make the image a “grayscale” image: that is, the palette (the colors that the image uses) should be a ramp from white to black. If you are painting the image yourself using Paint Shop Pro, Photoshop, or some similar program, you can specify that you want the image to be grayscale before you start. With the palette going from black to white, any white in the image will be totally opaque, and any black in the image will be totally transparent (invisible). Any gray in the image will be translucent: very translucent if it is near-black, and close to opaque if it is near white. Some applications will ramp the palette from black to white when you select “grayscale.
” That is, if you look at the color palette, the first color (usually the upper left-hand corner color) will be black, and the last color (usually the lower right-hand corner color) will be white. In this case, you want to invert your image, such that the black portions of your image are the parts that will be opaque, and the white portions are the parts that will be transparent. Be sure you check what the palette looks like after you save your file, and adjust it if necessary. Think of it this way: if your decal looks like a chalk drawing on a blackboard, you want the first color in your palette to be black (which will come through as completely transparent), ramping to the last color which is white (which will come through as opaque).
If your drawing looks like a pen drawing on white paper, the first color should be white, ramping to the last color which should be black. 3. Save this image in your half-lifelogos directory as a Windows bitmap (. bmp) file, and it will automatically show up in the list of decals you see in the launcher interface. There you can choose the decal’s color.
Changing the color of your decal during a game will not take effect for that game. Only after you restart your game will the new color appear. If you would like to view pre-made decals, several are shipped with Half-Life and can be found in the Half-Lifelogos directory. These will give you a good idea about the file format and appearance of a decal, before it appears in the game. IV.
3D HARDWARE ISSUSESHalf-Life has the ability to use both OpenGL and Direct3D. Many cards with support for 3D acceleration will provide both OpenGL and Direct3D drivers. Which one is better depends upon the quality and performance of the drivers themselves, and will vary from card to card. The latest release of DirectX, version 6. 0, is included on the Half-Life CD. It should be automatically installed as part of the Half-Life installation process.
If you need to reinstall at a later time, open the DirectX folder on your Half-Life installation CD and run dxsetup. exe. In general, make sure you have the latest versions of the device drivers for your display hardware. Most graphics card vendors make them freely available on the Internet, and a collection of links to sites of many popular cards is installed on your hard drive along with Half-Life. The default location for this file is:C:SIERRAHalf-LifemediaDrvPagedefault. htmVideo configuration is set in the ConfigurationVideoVideo modes menu in Half-Life.
The following section explains the known driver and compatibility issues for specific chipsets at the time of Half-Life’s shipping. If you have any questions about which chipset is incorporated in your graphics card, consult the documentation that accompanied your card, or contact the card manufacturer. 3DFX Banshee, Voodoo 1, Voodoo 2, Voodoo 2 SLIGet the latest drivers from your card manufacturer or get the latest drivers directly from the 3DFX site. Half-Life ships with the current, tested GL mini-driver.
Make sure that you have Glide version 2. 54 or above. Half-Life does not support Direct3D on Voodoo cards. The Voodoo 2 running in SLI mode on Windows/NT is prone to crashing. The solution to this instability is to either get an updated driver from 3DFX, disable SLI mode, or run under Windows 95/98.
3DFX RushWith the current drivers, Half-Life supports the Voodoo rush in software mode only. Check with 3DFX for an updated driver that offers support for Half-LifeNVIDIA Riva 128You must have Windows 95 OSR 2 or later, Windows 98 or Windows NT. As of shipping, Half-Life Riva 128 OpenGL support requires the latest reference driver from NVIDIA. Get this driver off of their site, www.
nvidia. com. Direct3D support is currently unavailable. Contact NVIDIA for a Direct3D driver that supports Half-Life. NVIDIA TNTHalf-Life supports the TNT in software, OpenGL and Direct3D modes.
Get the latest driver off of NVIDIAs site. Matrox G200Half-Life supports the G200 in software and Direct3D. Get the latest driver from Matroxs site, www. matrox.
com. Matrox will also be providing a GL mini-driver that will support OpenGL in Half-Life. Check with Matrox for details. S3 VirgeHalf-Life supports the Virge in software mode only. S3 SavageHalf-Life support the Savage in software and Direct3D. You can get the latest drivers from S3’s site, www.
s3. com. S3 will also be providing a GL driver that will support Half-Life. Check with S3 for details. General Issues:Missing Decals (i. e.
Bullet holes)Half-Life uses a feature of OpenGL and Direct3D that some video card drivers do not support correctly. To over ride the default settings for this feature, put this line in your opengl32. cfg or d3d. cfg file:gl_polyoffset 0. 1If this doesnt work, try -0. 1, 1 or 20.
This tells the driver how far to offset the decal from the surface of the polygon that the decal is being applied to. Direct3D or OpenGL are running very slowOn some cards that dont fully support Direct3D or OpenGL, Half-Life will fall back to a software emulation mode. These modes are very slow. If your Direct3D support is slow, try selecting OpenGL, and vice versa. If neither work, change your settings to use Half-Lifes software video modes instead and the speed will improve. Direct3D Input seems lagged.
If your input seems to lag behind the visual display on occasion, add this line to your d3d. cfg file:gl_d3dflip 1Network instabilityIf you have a connection to the Internet that is unstable, or prone to packet loss, try typing ‘cl_nodelta 1’ at the console (bring down the console with the ~ key). This will improve your overall network stability, but will sacrifice your overall latency. COMMON QUESTIONSWhat can I do if the game is too dark?. Some monitors are darker than others, but Half-Life provides controls to correct this problem.
You will need to adjust the Gamma and Glare Reduction settings in the ConfigurationVideoVideo options menu in Half-Life. These are used to adjust for different kinds of monitors and room brightness. Adjust the two sliders so that the Soldiers camouflage pattern is dark but visible. If this still doesn’t work, you then may need to adjust the actual brightness and contrast of your monitor. This is usually done by adjusting buttons or knobs on the front of your monitor, but all monitors are a bit different so you may want to look through your monitors documentation to be sure. Some places in the game are intentionally dark, and you’ll need to use your flashlight, but you should be able to see everything without difficulty in the opening train ride and throughout the first part of the game.
Some graphics cards also have support for controlling how bright the display is. If your card’s device driver supports this, you can find it by going to the Windows control panel, and selecting the Display applet. What can I do if the game looks washed out?The most likely cause is that your monitor is slightly brighter than average and the default game settings are for a darker monitor. You will need to adjust the Gamma and Glare Reduction settings in the ConfigurationVideoVideo options menu in Half-Life. These are used to adjust for different kinds of monitors and room brightness. Adjust the two sliders so that the Soldiers camouflage pattern is dark but visible.
If this still doesn’t work, you then may need to adjust the actual brightness and contrast of your monitor. This is usually done by adjusting buttons or knobs on the front of your monitor, but all monitors are a bit different so you may want to look through your monitors documentation to be sure. The most common problem, especially on new computers, is that “black” isn’t showing up as black, but more of a dark gray. Turn the Contrast down until the border around the edges of the picture are totally black, then slowly turn it back up until it just before it starts getting visibly lighter. You may need to adjust your monitors Brightness back up after you do this.
. Some graphics cards also have support for controlling how bright the display is. If your card’s device driver supports this, you can find it by going to the Windows control panel, and selecting the Display applet. V. CONTACTING SIERRAA) Customer Service, Support, and SalesB) Technical SupportC) Legal InformationA) Customer Service, Support, and SalesUnited StatesU. S.
A. Sales Phone: (800) 757-7707International Sales: (425) 746-5771 Hours: Monday-Saturday 7AM to 11 PM CST,Sundays 8 AM to 9PM CST FAX: (402) 393-3224Sierra Direct7100 W. Center RdSTE 301Omaha, NE 68106United KingdomCendant Software International LimitedMain: (0118) 920-9111Monday-Friday, 9:00 a. m.
– 5:00 p. m. Fax:(0118) 987-5603Disk/CD replacements in the U. K. are 6.
00,or 7. 00 outside the UK. Add “ATTN. : Returns. “2 Beacontree Plaza,Gillette Way,Reading, BerkshireRG2 0BS United KingdomFranceCendant Software International LimitedPhone: (01) 46-01-46-50Lundi au Vendredi de 9h 19h Fax: (01) 46-30-00-65Parc Tertiaire de MeudonImmeuble “Le Newton”25 rue Jeanne Braconnier 92366 Meudon La Fort CedexFranceGermanyCendant Software International Limited Tel: (0) 6103-99-40-40Montag bis Freitag von 9h – 19UhrFax: (0) 6103-99-40-35Robert-Bosh-Str. 32D-63303 DreieichGermanyOn-Line SalesCompuServe United Kingdom:GO UKSIERRACompuServe France: GO FRSIERRACompuServe Germany:GO DESIERRAInternet USA: http://www.
sierra. comInternet United Kingdom: http://www. sierra-online. co.
ukInternet France:http://www. sierra. frInternet Germany: http://www. sierra.
deTHE SIERRA NO-RISK GUARANTEEThe Promise: We want you to be happy with every Sierra product you purchase from us. Period. If for any reason you’re unhappy with the product, return it within 30 days for an exchange or a full refund. . . EVEN IF YOU BOUGHT IT RETAIL.
(Hardware ordered direct must be returned within ten days. ) Please send back your product, signature required if mailing via US Postal Service. The Only Catch: You’ve got to tell us why you don’t like the game. Otherwise, we’ll never get any better. Send it back to us and we promise we will make things right.
(If you bought it at a retail outlet, please send your original sales receipt. )* Returns valid in North America only. Disk and or Manual Replacement:Product Returns:Sierra On-Line Returns4100 West 190th StreetTorrance, CA 90504Sierra On-Line Fulfillment4100 West 190th StreetTorrance, CA 90504NOTE: To replace your disk(s) please send only Disk #1 (or the CD) and copy of your dated Receipt, if less then 90 days. After 90 days please include a $10 handling fee along with Disk / CD #1. For Documentation, please include a $ 5.
00 handling fee and a photocopy ONLY of disk #1. Payment should be made at the time of your request. Sorry, no credit cards. * Returns to this address valid in North America only.
B) TECHNICAL SUPPORTNorth AmericaSierra On-Line offers a 24-hour automated technical support line with recorded answers to the most frequently asked technical questions. To access this service, call (425) 644-4343, and follow the recorded instructions to find your specific topic and resolve the issue. If this fails to solve your problem, you may still write, or fax us with your questions, or contact us via our Web site. Sierra On-LineTechnical SupportP.
O. Box 85006Bellevue, WA 98015-8506Main: (425) 644-4343Monday-Friday, 10:00 a. m. – 6:45 p.
m. PST Fax:(425) 644-7697http://www. sierra. comemailprotectedUnited KingdomCendant Software International Limited offers a 24-hour Automated Technical Support line with recorded answers to the most frequently asked technical questions. To access this service, call (0118) 920-9111, and follow the recorded instructions to find your specific topic and resolve the issue. If this fails to solve your problem, you may still write, or fax us with your questions, or contact us via our Internet or CompuServe sites.
Cendant Software International Limited2 Beacontree Plaza,Gillette Way,Reading, BerkshireRG2 0BS United KingdomMain: (0118) 920-9111Monday-Friday, 9:00 a. m. – 5:00 p. m. Fax:(0118) 987-5603http://www. sierra-online.
co. ukFranceCendant Software International LimitedParc Tertiaire de MeudonImmeuble “Le Newton” 25 rue Jeanne Braconnier92366 Meudon La Fort CedexFranceTlphone: 01-46-01-46-50Lundi au Vendredi de 9h 19hFax: 01-46-30-00-65http://www. sierra. frGermanyCendant Software International LimitedRobert-Bosh-Str. 32D-63303 DreieichDeutschlandTel: (0) 6103-99-40-40Montag bis Freitag von 9 – 19UhrFax: (0) 6103-99-40-35Mailbox: (0) 6103-99-40-35http://www. sierra.
deSpainCendant Software International LimitedAvenida de Burgos 91-OF228036 MadridSpainTelfono: (01) 383-2623Lunes a Viernes de 9h30 a 14h y de 15h a 18h30Fax: (01) 381-2437ItalyContattare il vostro distribotore. C) Sierra Warranty & Legal InformationYou are entitled to use this product for your own use, but may not copy, reproduce, translate, publicly perform, display, or reduce to any electronic medium or machine- readable form, reproductions of the software or manual to other parties in any way, nor sell, rent or lease the product to others without prior written permission of Sierra. You may use one copy of the product on a single computer. YOU MAY NOT NETWORK THE PRODUCT OR OTHERWISE INSTALL IT OR USE IT ON MORE THAN ONE COMPUTER AT THE SAME TIME. UNAUTHORIZED REPRESENTATIONS: SIERRA WARRANTS ONLY THAT THE PROGRAM WILL PERFORM AS DESCRIBED IN THE USER DOCUMENTATION. NO OTHER ADVERTISING, DESCRIPTION, OR REPRESENTATION, WHETHER MADE BY A SIERRA DEALER, DISTRIBUTOR, AGENT, OR EMPLOYEE, SHALL BE BINDING UPON SIERRA OR SHALL CHANGE THE TERMS OF THIS WARRANTY.
IMPLIED WARRANTIES LIMITED: EXCEPT AS STATED ABOVE, SIERRA MAKES NO WARRANTY, EXPRESS OR IMPLIED, REGARDING THIS PRODUCT. SIERRA DISCLAIMS ANY WARRANTY THAT THE SOFTWARE IS FIT FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE NINETY (90) DAY DURATION OF THIS LIMITED EXPRESS WARRANTY AND IS OTHERWISE EXPRESSLY AND SPECIFICALLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. NO CONSEQUENTIAL DAMAGES: SIERRA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES, EVEN IF SIERRA IS ADVISED OF OR AWARE OF THE POSSIBILITY OF SUCH DAMAGES. THIS MEANS THAT SIERRA SHALL NOT BE RESPONSIBLE OR LIABLE FOR LOST PROFITS OR REVENUES, OR FOR DAMAGES OR COSTS INCURRED AS A RESULT OF LOSS OF TIME, DATA OR USE OF THE SOFTWARE, OR FROM ANY OTHER CAUSE EXCEPT THE ACTUAL COST OF THE PRODUCT.
IN NO EVENT SHALL SIERRA’S LIABILITY EXCEED THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.Copyright (1998 Sierra On-Line, Inc.)